This Reference CD consists of 5 training documents, 480 pages in all, dealing with cathodic protection methods and theory.
These training documents include criteria for cathodic protection, methodologies for the determination of required environmental conditions, methodologies for design of cathodic protection systems, examples of typical systems and design calculations, installation and construction practices, recommended initial system checkout procedures, and system maintenance requirements.
The images below show pages taken from these documents.
This Reference CD also includes Adobe PDF Reader for Windows 95, 98, 98SE, 2000, and XP to ensure you will be able to view thse documents.
|
|
ELECTRICAL ENGINEERING - CATHODIC PROTECTION
(312 pages)
MIL-HDBK-1004/10, 31 January 1990
Cathodic Protection Concepts
Criteria for Cathodic Protection
Cathodic Protection System Design Principles
Precautions for Cathodic Protection System Design
Impressed Current System
Sacrificial Anode System Design
Typical Cathodic Protection
Cathodic Protection System Design Examples
Installation and Construction Practices
System Checkout and Initial Adjustments
Maintaining Cathodic Protection
Economic Analysis
MAINTENCANCE AND OPERATION OF CATHODIC PROTECTION SYSTEMS
(82 pages)
Department of the Airforce
9 February 1982
Introduction to Maintenance and Operation of Cathodic Protection Systems
Cathodic Protection Systems
Test Equipment and Field Measurements
Operation and Maintencance of Galvanic Anodic Systems
Operation and Maintencance of Impressed Current Systems
Interference Testing and Control
Protective Coatings
Initiation and Maintenance of Records
Required Surveys and Testing
CATHODIC PROTECTION BY IMPRESSED CURRENT
(36 pages)
USACE / NAVFAC / AFCESA UFGS-13111N
(August 2001)
General
References
Related Requirements
Submittals
Services of Corrosion Engineer
Products
Anodes
Anode Vent Pipe
Rectifiers
Conduit and Cable for Power Service at 600 Volts or Less
Anode Junction Boxes and Test Stations
Insulating Flange Sets
Dielectric Unions
Bonding and Grounding Equipment
Electrical Insulating Coatings
Concrete Rectifier Pad
Rectifier Mounting Post
Casing Insulators and Seals
Permanent Reference Electrodes
Steel Flanges and Bolting
Exothermic Weld Kits
Execution
Anode Installation
Field Quality Control
CATHODIC PROTECTION BY GALVANIC ANODES
(24 pages)
USACE / NAVFAC / AFCESA
UFGS-13110N, September 2000
General
References
Related Requirements
Submittals
Services of Corrosion Engineer
Products
Anodes
Anode Junction Boxes, Bonding Boxes, and Test Stations
Permanent Reference Electrodes
Cable and Wire Other than Anode Lead Wires
Cable and Wire Identification Tags
Wire Connectors
Underground Splices
Conduit
Insulating Tape
Insulating Flange Sets
Steel Flanges and Bolting
Dielectric Unions
Exothermic Weld Kits
Electrically Insulating Coatings
Casing Insulators and Seals
Execution
Installation
Field Quality Control
CATHODIC PROTECTION SYSTEM (STEEL WATER TANKS)
(26 pages)
USACE / NAVFAC / AFCESA
UFGS-13112N, March 2000
General
References
Related Requirements
Submittals
Services of Corrosion Engineer
Products
Impressed Current Anodes
Galvanic Anodes
Anode Lead Wires
Rectifiers
Reference Electrodes
Shunt Resistors
Conduit
Cable other than Anode Lead Wires
Anode Junction Boxes
Clevis Assemblies
Pin Insulators
Handhole Assemblies
Exothermic Weld Kits
Execution
Installation
Bolted and Riveted Tanks
Gaseous Evolution
Criteria for Cathodic Protection
Field Quality Control
THESE DOCUMENTS ARE IN ELECTRONIC ADOBE PDF FORMAT
|
|
