This Reference CD consists of 9 documents of learning / training material, diagrams and images, 1601 pages in all, on the subject of ventilation. These documents really are exceptional in their content and detail.
This Reference CD would be a useful resource to anyone working in, looking to work in, or studying in residential, commercial and/or industrial heating, ventilation and air conditioning.
The images below show pages taken from these documents.
This Reference CD also includes Adobe PDF Reader for Windows 95, 98, 98SE, 2000, and XP to ensure you will be able to view these documents.
|
|
VENTILATION ASSESSMENT IN MECHANICALLY
VENTILATED COMMERCIAL BUILDINGS
(124 pages)
Building and Fire Research Laboratory, NIST
January, 1994
Background Information
Air and Airflow
Ventilation Systems and Components
Building Ventilation
Instrumentation
Air Temperature
Relative Humidity
Differential Pressure
Static Pressure Taps
Pitot Static Tubes
Hot Wire Anemometers
Rotating Vane Anemometers
Flow Hoods
Tracer Gas Monitors
Smoke Tubes
Measurement Techniques
Air Temperature
Barometric Pressure
Pressure Differences
Relative Humidity
Air Density
Tracer Gas Concentration
Percent Outdoor Intake
Airflow Rate
Air Change Rate
Assessment Procedures
Procedures
Applications
Space Use Analysis
System Design Evaluation
Comparing Space Use and Design
Performance Measurements
INDUSTRIAL VENTILATION AND EXHAUST
(47 pages)
USACE / NAVFAC / AFCESA UFGS-15801N
(September 1999)
General
References
General Requirements
Submittals
Quality Assurance
Posted Operating Instructions
Safety Precautions
Products
Fans, General Requirements for
Centrifugal Fans
[Vaneaxial] [Tubeaxial] Fans
Basic Materials
Fire Dampers
Miscellaneous Materials
Specialties
Supports and Hangers
Ductwork, Dust [And Fume] Collection
Protectively Coated Steel Ducts
Thermoplastic Ductwork
Fiberglass Ductwork
Vehicle Tail Pipe Exhaust System
Welding Fume Exhaust System
Stackheads
Execution
Installation
Testing, Adjusting, and Balancing
System[s] Operation Demonstration
Schedule
COOLING BUILDING BY NATURAL VENTILATION
(175 pages)
MIL-HDBK-1011/2
31 January 1990
Introduction
Scope
Purpose
Primary Criteria
Responsibilities of Planners and Designers
Cooling by Natural Ventilation
The Causes of Natural Ventilation
The Cooling Process
Comfort Criteria
Design Criteria
Building Design for Natural Ventilation
Building Design for Zoned and Seasonal Combinations
Building Design Features and Practices
Introduction
Site Selection and Planning
Landscaping
Building Form
Building Envelope and Structure
Auxiliary Fan Systems
Occupant and Maintenance Manuals
Purpose
Occupant's Manual
Maintenance Manual
MAINTENANCE AND OPERATION OF VENTILATION SYSTEMS
(74 pages)
Naval Facilities Engineering Command
February 1989
General
Introduction
Manufacturer Instructions
Codes
Tool Requirement
Safety
Mechanical Ventilation Systems
Fan and Duct Systems
Fan Curve
System Curves
Fan Types
Fan-to-Shaft Connection
Belt-Drive Fans
Drive Belts
Fan Laws
Velocity and CFM
The Velocity Traverse
Rotating Vane Anemometer
Deflecting Vane Velometer
Hot Wire Anemometer
Velocity Pressure and Static Pressure
Pitot Tube
Inclined Manometer
Pressure Gages
Alnor Velometer
Diffuser CFM
Test Procedure
Natural or Gravity Ventilation Systems
Wind-Operated Fans
Gravity Ventilators
Industrial Ventilation Systems
Hood
Air Cleaners
Duct Systems
Fans
Testing of Ventilation Systems
Mechanical Ventilation Cooling Systems
Fans and Installation Practices
Maintenance and Operation
Maintenance Instruction
Fans and Blowers
Motors
Fan Bearings
Vibration
INDUSTRIAL VENTILATION SYSTEMS
(138 pages)
MIL-HDBK-1003/17C, 29 February 1996
Introduction
General Technical Requirements
Asbestos Delagging Facilities
Otto Fuel II Facilities
Metal Cleaning and Electroplating
Fiberglass Reinforced Plastic Fabrication and Repair Facilities
Abrasive Blasting Facilities
Paint Spray Facilities
Foundries
Wood Shop Facilities
AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS
(74 pages)
USACE / NAVFAC / AFCESA, UFGS-15895
November 2003
General
References
Coordination of Trades
Delivery and Storage
Field Measurements
Submittals
Products
Standard Products
Asbestos Prohibition
Nameplates
Equipment Guards and Access
Piping Components
Electrical Work
Controls
Ductwork Components
Air Systems Equipment
Air Handling Units
Terminal Units
Energy Recovery Devices
Factory Painting
Execution
Installation
Field Painting and Identification Systems
Piping Hydrostatic Test
Ductwork Leak Test
Damper Acceptance Test
Testing, Adjusting, and Balancing
Performance Tests
Cleaning and Adjusting
Field Training
DUCTWORK AND DUCTWORK ACCESSORIES
(28 pages)
USACE / NAVFAC / AFCESA, UFGS-15810N
(February 2004)
General
References
Related Requirements
Pressure Classification
System Description
Design Requirements
Duct Span Versus Reinforcement Schedule
Louvered Penthouse
Automatic Dampers
Sound Pressure Level Rating
Sound Attenuators and Attenuator Ducts Acoustical Tests
Plenum or Casing Acoustical Tests
Submittals
Quality Assurance
Products
Metal Ducts
Ducts of Pressure Classes
Ducts of Pressure Classes 750 Pa 3 Inch Water Gage or less
Flexible Ducts and Connectors
Casings and Plenums
Fibrous Glass Ducts
Diffusers, Registers, and Grilles
Troffers
Duct Sleeves, Prepared Openings, and Closure Collars
Deflectors
Access Doors
Dampers and Louvers
Execution
Installation
Field Quality Control
SUBSURFACE VENTILATION AND ENVIRONMENTAL ENGINEERING
(1028 pages)
Background to Subsurface Ventilation and Environmental Engineering
Introduction to Fluid Mechanics
Fundamentals of Steady Flow Thermodynamics
Subsurface Ventilation Systems
Incompressible Flow Relationships
Ventilation Surveys
Ventilation Network Analysis
Mine Ventilation Thermodynamics
Ventilation Planning
Fans
Gases in Subsurface Openings
Methane
Radiation and Radon Gas
Psychrometry: the Study of Moisture in Air
Heat Flow into Subsurface Openings
Simulation of Climatic Conditions in the Subsurface
Physiological Reactions to Climatic Conditions
Refrigeration Plant and Mine Air Conditioning Systems
The Hazardous Nature of Dusts
The Aerodynamics, Sources and Control of Airborne Dust
Subsurface Fires and Explosions
TESTING INDUSTRIAL VENTILATION SYSTEMS
(33 pages)
USACE / NAVFAC / AFCESA, UFGS-15951N
September 1999
General
References
Definitions
Submittals
Quality Assurance
Sample Forms
Products
Execution
Test Procedure
Field Tests
Schedule
THESE DOCUMENTS ARE IN ELECTRONIC ADOBE PDF FORMAT
|
|
